High Hardness Clear Epoxy Resin for 3D and Metallic floor

Short Description:

Be composed of pure epoxy resin and hardener. Epoxy AB glue is a two component reactive resin glue. The difference in performance is mainly due to the difference in ratio, viscosity, transparency, operation time and curing time. substrates.

Send email to us

*Vedio:

*Product Features:

. Two component
. Epoxy resin AB glue can be cured under normal temperature
. low viscosity and good flowing property
. natural defoaming, anti-yellow
. high transparency
. no ripple, bright in surface.

*Product Application:

It can be widely used for Photo Frame Coating, Crystal Flooring Coating, Hand Made Jewelry, and Mold filling, Crafts, River Tables, Art wooden Tables, Star Tables, Staryy Walls, 3D Flooring Protect. etc.

*Technical Datas:

Item	Datas
Color and appearance of paint film	Transparent and smooth film
Hardness, Shore D	＜85
Operation Time ( 25 ℃）	30 Minutes
Hard Dry Time ( 25 ℃）	8-24 Hours
Full Curing Time ( 25 ℃）	7 Days
Withstand Voltage, KV/mm	22
Flexural Strength, Kg/mm²	28
Surface resistance, Ohmm²	5X1015
Withstand high temperature, ℃	80
Moisture absorption, %	＜0.15

*Surface treatment:

Completely remove the oil pollution on the surface of cement, sand and dust, moisture and so on, to ensure that the surface is smooth, clean, solid, dry, non foaming, not sand, no cracking, no oil. Water content should not be greater than 6%, the pH value is not greater than 10. The strength grade of cement concrete is not less than C20.

*Construction method:

1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

*Storage And Shelf Life:

1, Store at the tempestuous of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.