Excellent Performance Alkyd Blending Paint Iron Aluminum Steel Structure Iron Door Paint

Short Description:

The product is prepared by alkyd resin, drier, pigment, auxiliary agent and solvent.

MORE DETAILS

Vedio
Product Features
Product Application
Technical Datas
Construction Method
Surface Treatment
Construction condition
Package

*Vedio:

*Product Features:

1. Has good gloss and weather resistance;
2. Can withstand the strong changes of the climate, has good weather resistance, gloss and toughness, bright colors;
3. Good construction, brushing, spraying and drying, simple construction and low requirements on construction environment;
4. It has good adhesion to metal and wood, and has certain water resistance, and the coating film is full and hard;
5. It has the advantages of good durability and weather resistance, better decoration and protection.

*Product Application:

Alkyd paint is mainly used for the coating of general wood, furniture and home decoration. It is widely used in construction, machinery, vehicles and various decorative industries. It is the most common paint used on the market for outdoor ironwork, railings, gates, etc., and Low-demand metal anti-corrosion coatings, such as agricultural machinery, automobiles, instruments, industrial equipment, etc.

*Technical Datas:

Item	Standard
Color	All colors
Fineness	≤35
Flash point, ℃	38
Dry film thickness, um	30-50
Hardness，H	≥0.2
Volatile content,%	≤50
Drying time (25 degrees C), H	surface dry≤ 8h, hard dry≤ 24h
Solid Content,%	≥39.5
Salt Water resistance	48 hrs, no blister, no fall off, no change color

Executive Standard：HG/T2455-93

*Construction Method:

1. Air spraying and brushing are acceptable.
2. The substrate should be cleaned before use, without oil, dust, rust, etc.
3. The viscosity can be adjusted with X-6 alkyd diluent.
4. When spraying the topcoat, if the gloss is too high, it must be polished evenly with 120 mesh sandpaper or after the surface of the previous coat is dried and the construction is done before it is dried.
5. Alkyd anti-rust paint can not be directly used on zinc and aluminum substrates, and it has poor weather resistance when used alone, and should be used in conjunction with topcoat.

*Surface Treatment:

The surface of the primer should be clean, dry and pollution-free. Please pay attention to the coating interval between the construction and the primer.
All surfaces must be clean, dry and free of contamination. Before painting, should be assessed and treated in accordance with standard of the ISO8504:2000.

*Construction condition:

The temperature of the base floor is not less than 5℃, and at least 3℃ than the air dew point temperature, the relative humidity must less than 85% (should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.